Technical Publications by Dr. H. Ishikawa


--- Last update: April 1, 2000---

    [Dr. H. Ishikawa's Picture -KB]
    Professor Hiroshi Ishikawa
    Founding Dean
    Faculty of Engineering, Kagawa University
    2217-20 Hayashi-cho, Takamatsu City,
    Kagawa 761-0396 Japan
      Tel: +81-(0)87-864-2001
      Fax: +81-(0)87-864-2030
      e-mail: ishikawa@eng.kagawa-u.ac.jp
      URL: http://www.eng.kagawa-u.ac.jp/

    Residence:
    2-4-1 Tokiwa-cho, Takamatsu City,
    Kagawa 760-0054 Japan
      Tel: +81-(0)87-835-5631
      Fax: +81-(0)87-861-7512 URL: http://www.geocities.co.jp/NatureLand/2126/


Those of you who are interested in any of the following publications, please contact with Dr. H. Ishikawa at e-mail: ishikawa@eng.kagawa-u.ac.jp. Copies of the corresponding papers may be sent to you upon request.


[ Go Home | Back to Top ]

Books

  1. Edited by P. Thoft-Christensen and H. Ishikawa,
    "Reliability and Optimization of Structural Systems, V", IFIP Transactions B-12 (Proc. of the IFIP WG7.5 Conference on Reliability and Optimization of Structural Systems, held in Takamatsu, Japan, on March 24-26, 1993),
    October 1993, North-Holland (Elsevier Science Publishers Ltd.), Amsterdam.

  2. Edited by T. Nakagawa, H. Ishikawa and A. Tsurui,
    "Recent Studies on Structural Safety and Reliability, CJMR (Current Japanese Materials Research), Vol. 5",
    March 1989, Elsevier Applied Science, Amsterdam.

  3. Edited by M. Ichikawa, et al.,
    "Reliability Engineering in Practice for Mechanical and Structural Engineers", (in Japanese),
    September 1987, Yokendo, Ltd., Tokyo, Japan.

  4. H. Kimura and H. Ishikawa,
    "Linear Algebra", (in Japanese),
    May 1985, Baifukan Co., Ltd., Tokyo, Japan.

  5. H. Kimura, K. Ohyabu and H. Ishikawa,
    "Introduction to Statistics", (in Japanese),
    October 1982, Jikkyo Syuppan, Ltd.,Tokyo, Japan.

  6. M. Kawamoto, H. Ishikawa, et al.,
    "Fatigue of Metals and Machine Design", (in Japanese),
    May 1972, Corona Syuppan, Ltd., Tokyo, Japan.



[ Go Home | Back to Top ]

Translations (into Japanese)

  1. Translated by I. Konishi, N. Takaoka and H. Ishikawa,
    "Structural Safety and Reliability"(in Japanese),
    November 1984, Maruzen, Ltd., Tokyo, Japan,
    (Original: G.I. Schueller, "Einfuhrung in die Sicherheit und Zuverlassigkeit von Tragwerken", Wilhelm Ernst & Sohn, Munich, 1981)

  2. Translated by N. Yasokawa, et al.,
    "CONSUMER BEHAVIOR - Application of Theory",(in Japanese)
    May 1982, Shin-Hyoron, Ltd., Tokyo, Japan,
    (Original: John A. Howard, "CONSUMER BEHAVIOR - Application of Theory", McGraw-Hill, Inc., New York, 1977)



[ Go Home | Back to Top ]

Technical Papers (Journals and Proceedings)

  1. H. Tanaka and H. Ishikawa,
    "Theoretical Estimation of Probability Distribution of Seismic Peak Ground Acceleration Based upon Two-Dimensional Random field Model",
    Structural Safety and Reliability (Proc. of JCOSSAR'95), Vol.3, (1995-11), pp.152-159, JSAE.

  2. H. Ishikawa, H. Tanaka and S. Wakasa,
    "A Stochatic Crack Growth Model with Propagation Resistance as a Random Field",
    Reliability and Optimization of Structural Systems (Proc. of 6-th IFIP WG7.5 Conference on Reliability and Optimization of Structural Systems, Assisi, Italy), (1995-9), pp.136-143, Chapman & Hall.

  3. H. Ishikawa, H. Tanaka and S. Wakasa,
    "Effect of Spatially Distributed Random Ground Resistance on Probability Distribution of Peak Ground Acceleration",
    Computational Stochastic Mechanics (Proc. of 2-nd Int. Conf. on Computational Stochastic Mechanics, held in Athens, Greece, in June, 1994), (1995-6), pp.215-220, A. A. Balkma.

  4. A. Nanjo, H. Sekimoto, M. Kawatani, W. Shiraki, H. Furuta, H. Okada, H. Ishikawa and Y. Murotsu,
    "Structural Reliability Assessment of Girder Stiffeners on Urban Expressway Bridge",
    Strucural Safety and Reliability (Proc. of ICOSSAR'93, Innsbruck, Austria), Vol.1, (1993-8), pp.491-498, ASCE.

  5. H. Ishikawa, M. Zako, M. Mizutani and M. Kubo,
    "Statistical Properties of Loads",
    Journal of the JSMS, Vol.42, No.479, (1993-8), pp.1011-1016.

  6. H. Ishikawa, A. Tsurui and T. Shimokawa,
    "Data Processing Technology Based upon Reliability Engineering", (in Japanese),
    Journal of the JSMS, Vol.42, No.477, (1993-6), pp.714-719.

  7. H. Itagaki, H. Ishikawa, N. Yamamoto and T. Ishizuka,
    "A Consideration of Bayesian Analysis of Proof Test",
    Proc. of ISUMA'93 (2-nd International Symposium on Uncertainty Modeling and Analysis, held at Univ. of Maryland, College Park, Maryland, USA, on April 25-28, 1993), (1993-4), pp.1-6, IEEE Computer Society, Los Alamitos, CA, USA.

  8. H. Ishikawa, A. Tsurui, H. Tanaka and Hide. Ishikawa,
    "Reliability Assessment of Machines and Structures Based upon Probabilistic Fracture Mechanics",
    Probabilistic Engineering Mechanics, Vol.8, No.1, (1993), pp.43-56, Elsevier Science Publishers Ltd., Essex, England.

  9. H. Ishikawa, A. Tsurui, A. Utsumi, H. Tanaka and Hide. Ishikawa,
    "Effect of Stress Ratio on Crack Propagation Life Distribution under Random Loading",
    Probabilistic Engineering Mechanics, Vol.8, No.1, (1993), pp.35-41, Elsevier Science Publishers Ltd., Essex, England.

  10. H. Ishikawa, T. Tanimoto and H. Inomo,
    "Stochastic Modelling of Fatigue Life Distribution of Composite Materials Based upon Probabilistic Fracture Mechanics",
    Ed. by J. C. Soliman, Proc. of the 25-th ISATA (25-th Silver Jubilee International Symposium on Automotive Technology and Automation: Dedicated Conference on Mechatronics held in Frolence, Italy on June 1-5, 1992), (1992-6), pp.655-662, Automotive Automation Limited, Croydon, England.

  11. H. Ishikawa, A. Tsurui, H. Tanaka and H. Inomo,
    "Estimation of Statistical Parameters from Nonstatistical Experiment" (in Japanese),
    Structural safety and Reliability, Vol.2, (1991-11), pp.116-120, Japan Science Council and JSCE.

  12. M. Kubo, H. Nakahara and H. Ishikawa,
    "A Curve-Fitting Method of Combined Distribution in Probabilistic Modeling of Random Variables",
    Ed. by P. D. Spanos and C. A. Brebbia, Computational Stochastic Mechanics, (1991-9), pp.47-58, Co-published by Computational Mechanics Publications and Elsevier Applied Science.

  13. A. Miyamoto, A. Nishimura and H. Ishikawa,
    "Safety Evaluation and Residual Life Prediction of Concrete Bridges",
    Ed. by M. Jono and T. Inoue, Proc. of ICM-6 (Mechanical Behaviour of Materials - VI) held in Kyoto, Japan on July 29 - August 2, 1991, Vol.5, (1991-7), pp.1-6, JSMS.

  14. H. Ishikawa, T. Tanimoto and H. Inomo,
    "Fatigue Life Distribution Analysis of GFRP in Consideration of Spatially Distributed Random Crack Propagation Resistance",
    Ed. by M. Jono and T. Inoue, Proc. of ICM-6 (Mechanical Behaviour of Materials - VI) held in Kyoto, Japan on July 29 - August 2, 1991, Vol.1, (1991-7), pp.577-582, JSMS.

  15. Hide. Ishikawa, H. Inomo, A. Utsumi and H. Ishikawa,
    "Reliability-Based Fatigue-Proof Design of Machine and Structures Based upon Probabilistic Fracture Mechanics", (in Japanese) Journal of the JSMS, Vol.39, No.450, (1991-3), pp.276-282.

  16. Hide. Ishikawa, H. Inomo, A. Tsurui and H. Ishikawa,
    "Effect of Sample Size on Failure Probability in Both Weibull and Log-normal Probability Models",
    Proc. of the 4-th International Conference on Fatigue and Fatigue Threshold (Fatigue 90), Vol. IV, 1990-7, pp.2277-2282, Pergamon Press.

  17. H. Ishikawa, A. Tsurui and Hide. Ishikawa,
    "Some Aspects of Structural Reliability Assurance for Random Excitation Processes",
    JSME International Journal, Series I, Vol.32, No.4, (1989-11), pp.463-471, JSME.

  18. T. Tanimoto, H. Ishikawa and Hide. Ishikawa,
    "Fatigue Design and Reliability Analysis of CFRP Composites",
    Strucural Safety and Reliability (Proc. of ICOSSAR'89, San Francisco, U.S.A.), Vol. II, (1989-8), pp.1571-1578, ASCE.

  19. Hide. Ishikawa, H. Inomo, A. Utsumi, H. Ishikawa and H. Kimura,
    "Potential Applicability of Mathematical Statistics in Stochastic Modelling of Failure Phenomena",
    Strucural Safety and Reliability (Proc. of ICOSSAR'89, San Francisco, U.S.A.), Vol.II, (1989-8), pp.1491-1498, ASCE.

  20. Hide. ishikawa, K. Nakamura and H. Ishikawa,
    "Development of Simulation Program for Fatigue Crack Growth Behavior", (in Japanese),
    Jounal of Professional Ability Development, Vol.1, No.1, (1989-3), pp.65-73, Employment Promotion Agency.

  21. M. Shinozuka, H. Ishikawa and Hide. Ishikawa,
    "Practical Implementation of Fatigue-Proof Design in Structural Components with the Aid of Reliability-based Scatter Factors",
    Recent Studies on Structural Safety and Reliability, (Edited by T. Nakagawa, H. Ishikawa and A. Tsurui), CJMR(Current Japanese Materials Research), Vol.5, pp.25-50, (1989-3), Elsevier Science Publishers.

  22. T. Tanimoto, H. Ishikawa, Z. Maekawa and Hide. Ishikawa,
    "Fatigue Behavior and Reliability of Quasi-Isotropic Carbon/Epoxy Laminates",
    Proc. of the 4-th Japan-U.S. Conference on Composite Materials, held in Washington, D. C., U.S.A., (1988-6), pp.416-425, TECHNOMIC Publishing Co., Inc., Lancaster.

  23. H. Ishikawa, H. Kimura, A. Tsurui and A. Utumi,
    "Determination of Sample Size in Reliability-based Fatigue-Proof Design",
    Structural Safety and Reliability (Proc. of JCOSSAR'87), Vol.1, (1988-1), pp.11-16, JSMS.

  24. H. Ishikawa, A. Tsurui and H. Kimura,
    "Stochastic Fatigue Crack Growth Model and Its Wide Applicability in Reliability-Based Design",
    Statistical Research on Fatigue and Fracture, (Edited by T. Tanaka, S. Nishijima and M. Ichikawa), CJMR (Current Japanese Materials Research), Vol.2, (1987-10), pp.45-58, Elsevier Science Publishers.

  25. H. Ishikawa,
    "Basic Concept of Structural Safety and Reliability",
    Handbook on Statistical Engineering, (in Japanese), Edited by H. Tokumaru, et al., August 1987, Baifukan, Ltd., Tokyo, Japan.

  26. H. Ishikawa, A. Tsurui, A. Utumi and H. Tanaka,
    "The Effect of Stress Ratio on the Crack Propagation Life Distribution under Random Loading",
    Mechanical Behaviour of Materials - V (Proc. of the ICM-5), Edited by M. G. Yan, S. H. Zhang and Z. M. Zheng, Vol.1, (1987-6), pp.699-706, Pergamon Press.

  27. A. Tsurui, H. Ishikawa, A. Utumi and H. Tanaka,
    "Sensitivity Study on a Stochastic Fatigue Crack Growth Model under Stationary Random Loading",
    Mechanical Behaviour of Materials - V (Proc. of the ICM-5), Edited by M. G. Yan, S. H. Zhang and Z. M. Zheng, Vol.1, (1987-6), pp.691-698, Pergamon Press.

  28. H. Tanak, A. Tsurui and H. Ishikawa,
    "Cross-Effect of Uncertainty Factors Associated with Stochastic Crack Growth Process", (in Japanese),
    Journal of the JSMS, Vol.35, No.399, (1986-12), pp.1385-1391.

  29. A. Tsurui and H. Ishikawa,
    "Application of the Fokker-Planck Equation to a Stochastic Fatigue Crack Growth Model",
    Structural Safety, Vol.4, No.4, (1986-9), pp.15-29, Elsevier Science Publishers, Amsterdam.

  30. H. Ishikawa, T. Tanimoto, A. Tsurui and A. Utsumi,
    "Fracture Mechanics Approach to the Statistical Modelling of Residual Strength Degradation for Composites under Fatigue Loading",
    Composite-86: Recent Advances in Japan and the USA (Proc. of the 3rd US-Japan Conference on Composite Materials, Tokyo), Ed. by K. Kawata, S. Umekawa and A. Kobayashi, (1986-6), pp.125-132, The Japan Society for Composite Materials, KOKON Shoin, Co. Ltd., Tokyo, Japan.

  31. A. Tsurui, H. Ishikawa and A. Sako,
    "Stochastic Model of Fatigue Crack Growth Process in Consideration of Size Effect", (in Japanese),
    Journal of JSMS, Vol.35, No.393, June, 1986, pp.578-582.

  32. A. Tsurui and H. Ishikawa,
    "The Effect of Initial Flaws on the Reliability Degradation of Structural Components Based on a Stochastic Fatigue Crack Growth Model",
    Proc. of the 4th Int. Conf. on Structural Safety and Reliability (ICOSSAR'85), Vol.3, Ed. by I. Konishi, A.H-S. Ang and M. Shinozuka, May 1985, pp.495-500, IASSAR.

  33. H. Ishikawa, A. Tsurui, A. Utsumi and H. Kimura,
    "Determination of the Optimum Sample Size in the Reliability-Based Fatigue-Proof Design",
    Proc. of the 4th Int. Conf. on Structural Safety and Reliability (ICOSSAR'85), Vol.2, Ed. by I. Konishi, A.H-S. Ang and M. Shinozuka, May 1985, pp.401-410, IASSAR.

  34. H. Ishikawa and T. Tanimoto,
    "Statistical Characterization of Residual Structural Degradation for Laminated GRP Materials under Various Cyclic Loading Conditions",
    Proc. of the 4th Int. Conf. on Structural Safety and Reliability (ICOSSAR'85), Vol.1, Ed. by I. Konishi, A.H-S. Ang and M. Shinozuka, May 1985, pp.415-424, IASSAR.

  35. A. Tsurui and H. Ishikawa,
    "On the Reliability Degradation Based on Fatigue Crack Propagation", (in Japanese),
    Trans. JSME, Vol.51, No.461, January 1985, pp.17-22.

  36. A. Tsurui, H. Ishikawa and A. Utsumi,
    "Theoretical Study on the Distribution of Fatigue Crack Progration Life Under Stationary Roading", (in Japanese),
    Trans. JSME, Vol.51, No.461, January 1985, pp.31-37.

    ditto in English, Proc. of 2nd Int. Conf. on Fatigue Thresholds (Fatigue 84), Vol.2, Ed. By C.J. Beevers, September 1984, pp.949-957, The Chameleon Press Ltd., England.

  37. H. Ishikawa and A. Tsurui,
    "A Stochastic Model of Fatigue Crack Growth in Consideration Proc. of Random Propagation Resistance", (in Japanese),
    Trans. JSME, Vol.50, No.454, June 1984, pp.1309-1315.

    ditto in English, Proc. of The 2nd Int. Conf. on Fatigue Thresholds (Fatigue 84), Vol.1, Ed. by C.J. Beevers, September 1984, pp.511-520, The Chameleon Press Ltd., England.

  38. T. Tanimoto, H. Ishikawa and S. Amijima,
    "Statistical Residual Strength Degradation Process and Proof Test of FRP under Fully Reversed and Pulsating Loadings", (in Japanese),
    Journal of the JSMS, Vol.33, No.364, January 1984, pp.34-40.

  39. T. Tanimoto, H. Ishikawa and S. Amijima,
    "Residual Strength Degradation Model for Glass/Polyester Laminates under Repeated Tension and Compression Loadings",
    Proc. of the ICM-4, Vol.1, Edited by J. Carlsson and N.G. Ohlson, August 1983, pp.539-547, Pergamon Press.

  40. H. Ishikawa, A. Tsurui, T. Tanimoto and H. Kimura,
    "Reliability-Based Fatigue-Proof Design of Composite Materials",
    Proc. of ICM-4 (Mechanical Behaviour of Materials-4), Vol.1, Edited by J. Carlsson and N.G. Ohlson, August 1983, pp.533-537, Pergamon Press.

  41. H. Itagaki, N. Yamamoto and H. Ishikawa,
    "Study on the Bayesian Analysis of Proof Test", (in Japanese),
    Trans. JSNAME (Japan Society for Naval Architecture and Marine engineering), No.153, May 1983, pp.279-288.

  42. T. Tanimoto and H. Ishikawa,
    "Investigation on Residual Strength Degradation Model of FRP under Repeated Loading", (in Japanese),
    Journal of the JSMS, Vol.31, No.351, December 1982, pp.1217-1223.

  43. A. Tsurui, H. Ishikawa and H. Kimura,
    "On the Reliability of Failure Probability Estimation", (in Japanese),
    Journal of the JSMS, Vol.31, No.347, August 1982, pp.804-809.

  44. H. Ishikawa and A. Tsurui,
    "Stochastic Mature of Random Loads", (in Japanese),
    Journal of the JSMS, Vol.31, No.347, August 1982, pp.736-742.

  45. H. Ishikawa,
    "Reliability-based Design Methodology of Machines and/or Structures", (in Japanese),
    Journal of the JSMS, Vol.31, No.345, June 1982, pp.527-537.

  46. H. Ishikawa,
    "A State-of-the-Art Survey of the Reliability-based Design of Structures", (in Japanese),
    Journal of the JSSC (Japan Society of Steel Construction), (in Japanese), Vol.18, No.192, June 1982, pp.3-22.

  47. M. Fujino and H. Ishikawa,
    "A Statistical Consideration of Creep Strength Estimation", (in Japanese),
    Journal of the JSMS, Vol.31, No.343, April 1982, pp.403-408.

  48. H. Ishikawa, H. Kimura and T. Tanimoto,
    "Reliability-Based Approach to the Determination of Design Safe Lives of Composite Materials",
    Proc. of International Conf. on Structural Safety and Reliability (ICOSSAR'81), June 1981, pp.383-394, Elsevier Scientific Publishing Co.

  49. H. Ishikawa, T. Tanimoto, H. Kimura and M. Shinozuka,
    "Reliability Estimation of Machines and Structures with Life Distributions of Weibull Type", (in Japanese),
    Journal of the JSMS, Vol.30, No.328, January 1981, pp.39-45.

  50. T. Tanimoto, H. Ishikawa and S. Amijima,
    "Fatigue Life and Its Reliability of FRP under Multi-Step Loading",
    Proc. of the Japan-US Conf. on Composite Materials, Tokyo, Japan, January 1981, pp.145-154, Japan Society for Composite Materials.

  51. T. Tanimoto, H. Ishikawa and S. Amijima,
    "A Reliability Analysis Approach to Fatigue Life Dispersion of Laminated Glass Fiber Composite Materials",
    Proc. of the ICM-3 (Third International Conference on Mechanical Behaviors of Materials), London, UK, August 1979, pp.102-111.

  52. M. Shinozuka, S. Takada and H. Ishikawa,
    "Some Aspects of Seismic Risk Analysis of Underground Lifeline systems",
    Journal of Pressure Vessel Technology, Trans. ASME, Vol.101, No.1, February 1979, pp.31-43.

  53. M. Shinozuka, R. Vaicaitis and H. Ishikawa,
    "Dynamic Response and Failure of Window Panes",
    Proc. of the Specialty Conference on Probabilistic Mechanics and Structural Reliability, Tucson, Arizona, U.S.A., January 1979, pp.266-270, ASCE.

  54. M. Shinozuka, H. Ishikawa and H. Mitsuma,
    "Data-Based Nonstationary Random Processes",
    Proc. of the Specialty Conference on Probabilistic Mechanics and Structural Reliability, Tucson, Arizona, U.S.A., January 1979, pp.39-43, ASCE.

  55. T. Tanimoto, S. Amijima and H. Ishikawa,
    "Studies on the Reliability and Design Safe Life of Various FRP Materials under Rotating Fatigue Loading", (in Japanese),
    Journal of the JSMS, Vol.28, No.304, January 1979, pp.40-46.

  56. M. Shinozuka, S. Takada and H. Ishikawa,
    "Seismic Risk Analysis of Underground Lifeline Systems with the Aid of Damage Probability Matrix",
    Technical Report of Department of Civil Engineering and Engineering Mechanics, Columbia University, New York, N.Y., U.S.A., No. NSF-PFR-78-15049-CU-2, September 1978, pp.1-28.

  57. T. Tanimoto, H. Ishikawa and S. Amijima,
    "Statistical Aspect of tensile Failure of Laminated Glass Fiber Composite Materials",
    Proc. of the JSME International Symposium on HOPE (Hazard-free Operation against Potential Emergencies), Tokyo, Japan, November 1977, pp.109-115, JSME.

  58. M. Kawamoto, T. shibata and H. Ishikawa,
    "On the Reliability Analysis of Fatigue Life and Design Safe Life of Carbon Steel", (in Japanese),
    Journal of the JSMS, Vol.25, No.276, September 1976, pp.915-921.

  59. H. Ishikawa,
    "Reliability Analysis of Fatigue Lives of Machines and Structures under Service Loading - Part 8. Reliability-based Design by Joint Consideration of Load and Strength Distributions (II)", (in Japanese),
    Journal of the JSMS, Vol.24, No.266, November 1975, pp.1072-1081.

  60. H. Ishikawa,
    "ditto - Part 7. Reliability-based Design by Joint Consideration of Load and Strength Distributions (I)", (in Japanese),
    Journal of the JSMS, Vol.24, No.265, October 1975, pp.993-1000.

  61. H. Ishikawa,
    "ditto - Part 6. Statistical Characteristics of Service Loads", (in Japanese),
    Journal of the JSMS, Vol.24, No.264, September 1975, pp.914-924.

  62. H. Ishikawa,
    "ditto - Part 5. Statistical Method of Parameter Estimation and Determination of Design Safe Life (III)", (in Japanese),
    Journal of the JSMS, Vol.24, No.263, August 1975, pp.783-788.

  63. H. Ishikawa,
    "ditto - Part 4. Statistical Method of Parameter Estimation and Determiation of Design Safe Life (II)", (in Japanese),
    Journal of the JSMS, Vol.24, No.262, July 1975, pp.693-703.

  64. H. Ishikawa,
    "ditto - Part 3. Statistical Method of Parameter Estimation and Determination of Design Safe Life (I)", (in Japanese),
    Journal of the JSMS, Vol.24, No.261, June 1975, pp.563-573.

  65. H. Ishikawa,
    "ditto - Part 2. Weibull Probability Model, Order Statistics and TTFF", (in Japanese),
    Journal of the JSMS, Vol.24, No.260, May 1975, pp.477-488.

  66. H. Ishikawa,
    "ditto - Part 1. Basic Concept of Reliability Engineering", (in Japanese),
    Journal of the JSMS, Vol.24, No.259, April 1975, pp.344-355.

  67. M. Kawamoto, H. Ishikawa and N. Inoue,
    "Fatigue Test Results and Fatigue Life Estimation on Hard Steel and Aluminum Alloy under Random Loads", (in Japanese),
    Bulletin of the JSME, Vol.18, No.122, August 1975, pp.761-768.

  68. M. Kawamoto, H. Ishikawa and T. Takagi,
    "Fatigue Life Estimation under Composite Gaussian Random Loading with Different Powers", (in Japanese),
    Journal of the JSMS, Vol.24, No.260, May 1975, pp.469-476.

  69. M. Kawamoto, H. Ishikawa and T. Onoe,
    "Service Load Counting and Fatigue Life Estimation by the Full Wave Count Method", (in Japanese),
    Trans. JSME, Vol.37, No.296, April 1971, pp.657-669.

    ditto in English, Memoirs of the Faculty of Engineering, Kyoto University, Vol.35, No.1, September 1972, pp.37-51.

  70. M. Kawamoto, Y. Ibuki and H. Ishikawa,
    "A Newly Devised Resonance Type Rotating Bending Fatigue Testing Machine and Some Fatigue Tests", (in Japanese),
    Trans. JSME, Vol.37, No.294, February 1971, pp.213-220.

    ditto, Bulletin of the JSME, Vol.14, No.76, October 1971, pp.1013-1020.

  71. M. Kawamoto, Y. Ibuki and H. Ishikawa,
    "A New Mechanical Random Fatigue Testing Machine and Some Test Results", (in Japanese),
    Journal of the JSME, Vol.73, No.621, October 1970, pp.1367-1374.

    ditto, Bulletin of the JSME, Vol.14, No.72, June 1971, pp.525-533.

  72. M. Kawamoto, Y. Ibuki and H. Ishikawa,
    "Fatigue Strength and Deformation for Rotating Bending at Elevated Temperatures", Proc. of the 14-th Japan Congress on Materials Research, March 1971, pp.42-47, JSMS.

  73. M. Kawamoto, Y. Ibuki and H. Ishikawa,
    "The Effect of Block Size and Cycle Ratio of Peak Load on the Fatigue Strength under Program Loading",
    Proc. of the 13-th Japan Congress on Materials Research, March 1970, pp.88-91, JSMS.

  74. M. Kawamoto, Y. Ibuki and H. Ishikawa,
    "Fatigue Strength and Deformation at Rotating Bending in Program Loading Tests",
    Proc. of the 12-th Japan Congress on Materials Research, March 1969, pp.60-63, JSMS.

  75. M. Kawamoto, T. Shibata and H. Ishikawa,
    "The Effect of Stress Sequence on Fatigue Strength under Program Loading",
    Journal of the JSMS, Vol.17, No.173, February 1968, pp.103-107.

  76. M. Kawamoto, Y. Ibuki and H. Ishikawa,
    "Fatigue Strength and Deformation at Rotating Bending in Program Loading Tests", (in Japanese),
    Journal of the JSMS (The Society of Materials Science, Japan), Vol.17, No.173, February 1968, pp.97-102.



[ Go Home | Back to Top ]

Technical Papers (Others)

  1. Hide. Ishikawa, H. Ishikawa and Y. Murotsu,
    "Effect of Retardation on Crack Propagation Life Distribution under Random Loading", (in Japanese),
    Bulletin of University of Osaka Prefecture, Ser. A, Vol.39, No.2, (1991-3), pp.115-137.

  2. H. Ishikawa and Hide. Ishikawa,
    "Some Aspects of Statistical Inference of Weibull Parameters with Wide Applicability in Reliability-based Design",
    The Kagawa University Economic Review, Vol.63, No.1, (1990-6), pp.31-90.

  3. H. Ishikawa and A. Tsurui,
    "Reliability Evaluation of Machines and Structures Based upon Probabilistic Fracture Mechanics", (in Japanese),
    Journal of KAGAWA-TECHNO, '90-No.14, (1990-5), pp.2-33, Kagawa Tecno Foundation.

  4. H. Ishikawa and Hide. Ishikawa,
    "Sampling Test in View of Reliability Management Techniques", (in Japanese),
    Development of Managerial Science Technologies", (1988-3), pp.1-37, College of Economics, Kagawa University.

  5. H. Ishikawa and M. Honda,
    "Current Status Survey of Computer Software Industries in Kagawa Prefecture", (in Japanese),
    Managerial Science Techniques for Regional Economy Promotion, March, 1986, pp.129-197, College of Economics, Kagawa Univ.

  6. H. Ishikawa,
    "Spectral Analysis of Stochastic Processes: with an Emphasis on Nonstationary Processes", (in Japanese),
    Managerial Science Techniques for Regional Economy Promotion, March, 1986, pp.76-110, College of Economics, Kagawa Univ.

  7. H. Kimura and H. Ishikawa,
    "On the Statistical Hypothesis Testing", (in Japanese),
    the Kagawa University Economic Review, Vol.57, No.3, December 1984, pp.421-441.

  8. H. Ishikawa and A. Tsurui,
    "Study on the Markov Approximation of the System with Random Input", (in Japanese),
    the Kagawa University Economic Review, Vol.57, No.1, June 1984, pp.177-207.

  9. H. Ishikawa,
    "Computer Simulation of Fatigue Crack Propagation under Random Loading",
    the Kagawa University Economic Review, Vol.54, No.4, March 1982, pp.741-767.

  10. H. Ishikawa,
    "A Statistical Approach to the Assessment of the Validity of a Computer Program", (in Japanese),
    the Kagawa University Economic Review, Vol.54, No.1, June 1981, pp.319-336.

  11. H. Ishikawa and M. Shinozuka,
    "Probabilistic Law of Crack Propagation",
    the Kagawa University Economic Review, Vol.53, No.4, March 1981, pp.1275-1283.

  12. H. Ishikawa and H. Kimura,
    "Toward Reliable Machine Design", (in Japanese),
    the Kagawa University Economic Review, Vol.53, No.3, January 1981, pp.824-851.

  13. H. Ishikawa and H. Kimura,
    "Basic Concept of Probability and Bayes' Theorem",
    the Kagawa University Economic Review, Vol.53, No.1, June 1980, pp.1-58.

  14. H. Ishikawa,
    "Computer Program Development for the Simulation of Data-Based Nonstationary Random Processes",
    the Kagawa University Economic Review, Vol.52, No.5, December 1979, pp.427-502.

  15. H. Ishikawa, M. Shinozuka and H. Mitsuma,
    "Digital Simulation of Nonstationary Random Processes and Its Applications", (in Japanese),
    the Kagawa University Economic Review, Vol.52, No.3 4, September 1979, pp.308-373.

  16. H. Ishikawa and H. Kimura,
    "Mathematical Representation of Stochastic Phenomena and Fatigue Life Estimation under Random Loading", (in Japanese),
    the Kagawa University Economic Review, Vol.52, No.1 2, June 1979, pp.96-183.

  17. M. Kawamoto, H. Ishikawa and T. Shibata,
    "The Effect of Stress Sequence on the Fatigue Strength under Program Loading", (in Japanese),
    Memoirs of the Faculty of Engineering, Kyoto University, Vol.35, No.2, January 1973, pp.28-36.



[ Go Home | Back to Top ]

Miscellanies

    Sorry! This item is now under preparation!


[ Go Home | Back to Top ]

Please e-mail us your suggestions, comments and/or questions, if any, at ishikawa@eng.kagawa-u.ac.jp

Sublogo of Ishikawa's Lab

    Copyright: © 1996-2000 Dr. H. Ishikawa
    Founding Dean of Faculty of Engineering, Kagawa University,
    2217-20 Hayashi-cho, Takamatsu City, Kagawa 761-0396 Japan
    Phone: +81-87-864-2001 Fax: +81-87-864-2030

[ Home Page | Back to Top ]